Finland- Tuotteet
Ladattavat tiedostot LLEAP - Laerdal Learning Application
Asiakirja
Laerdal Network Requirement Document Rev O
0.8 MB
15.06.2022
DFU
SimStart User Guide
3.4 MB - English
10.01.2020
Quick Guide WiFi setup
1.2 MB - English
24.06.2019
Session Viewer - User Guide
2.7 MB - Multilingual
10.07.2015
Ohjelmisto
Laerdal Learning Application (LLEAP) v. 8.3.0
1 442.5 MB
30.06.2022
Changes in this release:
- LLEAP.
- New beta feature called Support Documents.
- Ability to get scenario notes on screen.
- Supported formats: pdf,xps,txt,html,jpeg,bmp,gif,png or direct links to web pages.
- For scenarios from Scenario Cloud there might already be support documents defined, and those will then be shown.
- Demo theme called 'Demo - try me out'.
- Added information for Scenario Cloud scenarios that are about the expire.
- Added possibility to reload scenario, use full when editing scenarios in SimDesigner.
- Added shortcut to SimDesigner from select theme and scenario dialogues.
- Removed EFM for male patient and above 65 year.
- Removing software support for ad hoc connections/SimLink.
- Fix for VCA.
- Fix for shutting down Patient Monitor from LLEAP.
- Fix for using plugins (SimCapture, ASL 5000, etc).
- Fix for Idioventricular rhythm to get heart rate .
- Fix for Idioventricular rhythm and SpO2.
- Patient Monitor.
- Improved user interface for Defibrillator Monitor.
- Fix for shutting down Patient Monitor from LLEAP.
- Fix for split screen on Patient Monitor.
- Removing software support for ad hoc connections/SimLink.
- Simulator Firmware & Network Wizard (SFNW).
- Added option to update the ShockLink version on Link Box simulators.
- Fix for an issue where a configured network would show up as “Not configured”.
Note: If you have questions regarding the changes to ad-hoc/SimLink network support, please contact your local Tech Support.
Known issues for 8.3:
- Pausing session can lead to losing the session.
- When pacing is from defibrillator, then Laerdal Patient monitor will show asystole for up to around 2 minutes.
Laerdal Patient Monitor v. 8.3.0
798.9 MB
30.06.2022
Changes in this release:
- Improved user interface for Defibrillator Monitor.
- Fix for shutting down Patient Monitor from LLEAP.
- Fix for split screen on Patient Monitor.
- Removing software support for ad hoc connections/SimLink.
Note: If you have questions regarding the changes to ad-hoc/SimLink network support, please contact your local Tech Support.
LLEAP Patch for 7.3.0
0.4 MB - English
28.07.2021
LLEAP Patch for 7.3.0, for older SimMan 3G who can't use LLEAP 8.0
This update is supplied to fix an issue where chest rise and lung sounds ceases on the SimMan 3G when used with ASL 5000 using a ventilator setting of PEEP 2 cm H2O or greater. The issue can also be resolved by upgrading to LLEAP 8.0.0. This patch should only be used if upgrade to 8.0.0 is not possible, e.g if using older SimMan 3G with XP embedded which is not supported on LLEAP 8.0.0 and onwards.
Important: ASL 5000 plugin needs to be uninstalled before patch installation and reinstalled afterwards. Remember to back up custom lung models when prompted during uninstall process and import again during install process after upgrade to patch.
Note:
-
SimMan 3G updater might need several tries before the patch is installed on simulator
Laerdal Learning Application (LLEAP) v. 7.3.0
1 526.9 MB
16.03.2021
Important:
- You may receive a "Windows Defender SmartScreen prevented an unrecognized app from running" Error Message when installing LLEAP. Explanation and how to handle this is explained here:https://laerdal.force.com/HelpCenter/s/article/How-to-handle-error-message-Windows-Defender-SmartScreen-prevented-an-unrecognized-app-from-running.
Changes in this release:
- New Device Connection Manager (DCM) application to manage network configurations more efficiently on multiple manikins.
- Enhanced support for Enterprise Network Security from SFNW & for SimMan3G with Wifi USB adapter.
- Fixed an issue where SimMan3G system time was not synced.
- Improved simulator connection on networks with high latency.
- Included WiFi driver to LLEAP installer (for SOM on SimMan3G).
- Fixed an issue where the simulation wouldn't use the wanted simulation profile unless explicitly selected. Could lead to using wrong units and similar problems.
- LLEAP supports transport layer security (TLS) 1.2 or greater for login to Scenario Cloud.
- Fixed an issue causing help files not to work.
Note:
Updating to Windows 10?- Using SimLink or Custom ad hoc network on SimPad, and considering upgrading to Windows 10 on your computers for Laerdal Patient Monitor?
- 微软结束了他们支持这种类型的网络work with the release of Windows 8. From Windows 10 on, the equipment will need to use a separate simulation network. Laerdal can help you connect all your simulation equipment to a dedicated network. Learn more and get started atLaerdal.com/Network.
- LLEAP 7.3 will be the last version that supports Windows 7.
Due to end of life for Windows XP Embedded used on older SimMan3G simulators, LLEAP will no longer supported as of this version, this applies to the following simulators - unless they have been upgraded to use Windows 7:
- SimMan3G simulators with serial numbers lower than 212-16140000
- SimMan3G Essential simulators with serial numbers lower than 213-16140000
- SimMan3G Essential Bleeding simulators with serial numbers lower than 214-1614000
- Before installing LLEAP, to secure a successful installation, please make sure the PC is fully updated through Windows Update. If you have problems starting LLEAP after installation, please download and run Visual C++ 2015 redistributable from this location:Microsoft Visual C++ 2015 Redistributable Update 3.. Select and run vc_redist.x86 then try running LLEAP.
Laerdal PatientMonitor v. 7.3.0
932.6 MB
11.03.2021
Important:
- You may receive a "Windows Defender SmartScreen prevented an unrecognized app from running" Error Message when installing LLEAP. Explanation and how to handle this is explained here:How to handle error message "Windows Defender SmartScreen prevented an unrecognized app from running"?.
The Laerdal Patient Monitor software is compatible with LLEAP and SimPad.
Laerdal Patient Monitor software is included when you download LLEAP. This download allows you to install Laerdal Patient Monitor software without installing LLEAP on the same computer.
Changes in this release:
- New version to align with LLEAP 7.3.0
- General maintenance, bugfixes and improvements.
Note:
Updating to Windows 10?- Using SimLink or Custom ad hoc network on SimPad, and considering upgrading to Windows 10 on your computers for Laerdal Patient Monitor?
- 微软结束了他们支持这种类型的网络work with the release of Windows 8. From Windows 10 the equipment will need to use a separate simulation network.
- Laerdal 7.3将是最后一个病人监护仪中on that supports Windows 7
Laerdal Learning Application (LLEAP) v. 6.8.1
1 225.5 MB
18.12.2019
Changes in this release:
- Simulator lost connection - Improving error message.
- SimBaby - Improved trachostomy functionality to close Laryngospasm and open airways.
- 与咽阻塞SimBaby——固定问题not showing in Instructor Application for a virtual simulator.
- Themes - Now showing features related to available simulator.
- SimJunior - Fixed issue where simualtor did not show in simulator list.
- SimMom - Now possible to connect SimMom using Advanced option.
- LLEAP - Fixed issue related to changeing vital signs before starting session.
- LLEAP - Fixed issue related to application start.
- SimMan 3G - Fixed an issue where changes to tracheostoma opening is logged for SimMan 3G which is not supporting it.
- LLEAP - Fixed an issue where SessionViewer still shows state "Recording" if LLEAP selects to start a new session .
- Stop compression event - Fixed an issue where stopping simulated compression did not result in a "Stop compression" even.
Changes since 6.8.0:
- Added support for SimBaby with Tracheostomy.
- Several improvements and adjustments to UI for SimNewB.
- Added a Stopwatch function. Click on the time-field next to the Play/Pause button on the Session control window to show the Stopwatch window..
- Added a new pre-recorded vocal sound “OK” for Adult(Male/Female) and Child.
- Improved UI for Stomach distention function. Now have a separate “Release air” button. For SimJunior there is also a separate “Inflate” button.
- Fixed an issue where LLEAP would sometimes crash when ending a session.
- Fixed an issue where Tongue fallback was not working properly when running a scenario.
- Fixed an issue where transitions of User Defined Variables would not always end up on the correct value.
Laerdal Patient Monitor v. 6.8.1
673.3 MB
18.12.2019
The Laerdal Patient Monitor software is compatible with LLEAP and SimPad.
Laerdal Patient Monitor software is included when you download LLEAP. This download allows you to install Laerdal Patient Monitor software without installing LLEAP on the same computer.
New version to align with LLEAP 6.8.1
Changes in this release:
- Defibrillator Monitor - Fixed issue with layout.
- Patient Monitor Layout - Fixed issue with hidden buttons after minimizing application.
- Metronom sound - Fixed issue where metronome sound did not start.
- ECG AV Block - Fixed issue with wrong HR on high heart rates.
- SimMom - Fixed issue where SimMom was listed twice in simulator list.
Changes since 6.8.0:
- Simulated AED and Defibrillator monitor (SimStart) now have translated voice prompts.
- Improved volume indicator on simulated AED/Defibrillator monitor.
- Fixed an issue where the NIBP auto measurement would be triggered too often.
- Fixed an issue where the NIBP measurement would sometimes be shown before activating the measurement.
- Fixed an issue where some buttons would not show after minimizing the Patient Monitor window.
- Fixed an issue where Patient Monitor in AED mode would sometimes crash.
SimView Downloads
24.11.2017
SimView Mobile Downloads
24.11.2017
Session Viewer Downloads
09.11.2017