Ohjelmisto
Simpad Plus 8.1.7
31.08.2022
Improvements and new features:
- SimCapture room selector changed from check boxes to radio button as only one location can be selected.
- Tip banners are changed so they disappear without user having to manually dismiss them.
- 翻译更新。
Bug修复:
- Fix for a problem where no CO2 curve would be shown when performing ventilations while having VFib rhythm activated .
- A misleading error message that was shown when connecting to SimCapture if camera nodes were turned on has been improved .
- Improved handling of loss of connection during CPR training: it is now possible to continue the CPR training after regaining a connection.
- For Nursing Anne Simulator, SimNewB and SimBaby limb movement will now stop, and eyes will close when blood pressure goes to 0/0 .
- 修复一个问题,即护理安妮模拟器上的声音并不总是与会话设置中的年龄和性别相匹配。
SimPad SkillReporter (BLS) fix:
- SimPad SkillReporter: Correction of impact of hand position on overall CPR scoring.
8.1.0的新功能,改进和错误修复:
- 模拟器的WiFi信号强度。
- Accurate CPR score when doing ventilations and compressions at the same time.
- ERC指南2021。
- SimCapture select locations and capture nodes.
- Fix when typing wrong password on enterprise wifi network.
- Changes to manikin selection screen.
- 显示主题的自定义声音和Manikin的默认声音。
- 模拟器可能会挂在关闭时。
- 手动模式某些值不可能添加和存储到主题状态。
- Supporting more than 8 SimCapture nodes.
- SimNewB ventilation airway panel, displaying correct volume.
- 保存自定义特定的无线信道
- Adding extrasystole artifact to Anterior AMI heart rhythm.
- Voice Conferencing Audio would sometime not reconnect on poor network.
- 60年以反映正确的心电图曲线的壁炉节奏图标已更新60年。
- Warning banner for simulator connection did not automatically disappear after simulator reconnect, fixed so that user no longer has to manually dismiss.
- SimNewB Lung recruitment was easier to complete on second attempt – corrected so that equal effort is required on each attempt.
- SIMNEWB校正的浅胸部和不规则的胸部上升。
- Simpad SkillReporter -BLS学习者评估记录文件使用保存和上传按钮。
Note:
模拟器更新
- 更新护理Anne Simulator,Simnewb和Simbaby最多需要60分钟。等待在Manikin上稳定的绿灯。
- Resusci Manikins更新最多可能需要5分钟。
Simpad主题编辑1.3.1
3.8 MB - English
11.10.2021
SIMPAD主题编辑器是使用手动模式操作时为SIMPAD系统创建主题的PC软件工具。该程序使您可以轻松地通过状态和干预措施制作新主题。新版本不再是在线工具。请在计算机上下载并安装Simpad主题编辑本地。
- Dependency on Microsoft Silverlight removed, so that Theme Editor can be used without Silverlight installed.
- Minor changes to user interface.
Simpad Plus 7.4.5
11.06.2021
此版本的更改:
- 如果用户退出会话,则标准化患者的会话日志文件不是存储的。
Changes from version 7.4.0:
- Nursing Anne Simulators will have a new option in Session Information to change the default age and gender of the manikin (per now it only affects prerecorded sounds).
- Age and Gender Setup button is only visible when connected to a Nursing Anne Simulator .
- Voice Conferencing Application (VCA) improvements.
- 偶尔对VCA的混叠已得到改善。
- Prerecorded sounds will in some cases sound loud through the instructor headset, a button to automatically mute instructor headset when playing prerecorded sounds has been added.
- 修复Simman Als上的声音。
- 修复BLS讲师的流量分数得分。
- 修复了护理Anne Simulator,Simnewb和Simbaby的问题,在运行第一次会话后,他们有时不会连接。
- Corrected problem where SimPad would sometimes not connect to internet enabled services such as Laerdal Scenario Cloud.
- Fixed ShockLink update issue where some devices would fail to update to newest version.
Note:
更新Windows 10?
- Using SimLink or Custom ad hoc network on SimPad, and considering upgrading to Windows 10 on your computers for Laerdal Patient Monitor?
- Microsoft ended their support for this type of network with the release of Windows 8. From Windows 10 the equipment will need to use a separate simulation network.
Windows 7
- 患者监视器8.0.0,新较新将不支持Windows 7
- Updating Nursing Anne Simulator, SimNewB and SimBaby take up to 20 minutes. Wait for a steady green light on the manikin.
- Resusci manikins are updated with new firmware, the update takes up to 5 minutes.
SimPad PLUS 6.8.1
04.12.2019
此版本的更改:
- BugFix不良语音会议音频。
- BugFix Audio feedback using external microphone to SimJunior manikin .
- 通风时的BugFix Simbaby人造胸部。
- BugFix Simstart虚拟垫未注册。
- BugFix Simstart AED未在使用Simpad BLS讲师时检测到。
- Bugfix Standarized Patient spins forever.
Changes since 6.8.0:
- SimPad :
- SIMPAD手动模式:震动没有设置为下一个心律。
- 许可证:可以删除SIPPAD许可证。
- Simpad Classic:无法在WiFi上访问Simstore。
- Nursing Anne Simulator:
- 语音会议系统更高的默认卷
- More silent running chest rise
- Simbaby:
- Possible for the instructor to trigger intubation event in Manual Mode
- 使用Simpad时添加了疾驰的心声音
- 气管切开术护理:通风时固定气道泄漏
- 暂停会议时,运动和癫痫发作应停止
- 胃张开按钮
- 固定ETCO2曲线在通风时在患者监视器上
- 通风时没有肺部声音
- SimNewB:
- 胃张开按钮
- Simbaby:Possible for the instructor to trigger intubation event in Manual Mode
- Other:
- RA QCPR:更新的固件
- Resuci Junior QCPR:更新的固件
- SimJunior:胃张开按钮的释放按钮
- Sounds Trainer: Possible to adjust sound volume levels
Note:
- Updating Nursing Anne Simulator, SimNewB and SimBaby take up to 20 minutes. Wait for a steady green light on the manikin.
- Resusci manikins are updated with new firmware, the update takes up to 5 minutes.
会话查看器下载
09.11.2017
使用此链接将最新软件下载到会话查看器
Simpad主题编辑
- 英语
05.01.2016
重要信息 - 仅使用Internet Explorer才能访问此软件
主题编辑器是一种在线PC软件工具,用于使用手动模式操作时为SIMPAD系统创建主题。该程序使您可以轻松地通过状态和干预措施制作新主题。
要脱机:右键单击网页中的Anywere,然后选择“安装Simpad主题编辑器”到这张计算机...