Downloads for SimPad

Quick Guide WiFi setup

1.2 MB - Angielski
24.06.2019

SimPad and SimPad PLUS Combined User Guide - EN

23.6 MB - Angielski
12.06.2019

How to Update SimPad and SimPad PLUS Software

0.4 MB - Multilingual
03.11.2017

This document explains how to update the software on your SimPad and Link Box, including PLUS version.

QSG for Simpad with Session Viewer

3.4 MB - Angielski
07.12.2015

This Quick Setup Guide will support you in connecting your SimView Mobile system or Session Viewer with SimPad running SW 5.0 or higher

QSG for Simpad with Sim View

2.1 MB - Angielski
07.12.2015

This Quick Setup Guide will support you in connecting your SimView server system with SImPad running SW 5.0 or higher

Laerdal Network Requirement Document Rev O

0.8 MB
15.06.2022

This document describes the requirements for setting up a network on pre-existing infrastructure specifically for Laerdal simulation devices.

SimPad Theme Editor 1.3.1

3.8 MB - Angielski
11.10.2021

SimPad Theme Editor is a PC software tool for creating Themes for the SimPad system when operated using the Manual Mode. The program allows you to easily make new Themes with States and Interventions. The new version is no longer an online tool. Please download and install SimPad Theme Editor localy on your computer.

• Dependency on Microsoft Silverlight removed, so that Theme Editor can be used without Silverlight installed.
• Minor changes to user interface.

SimPad 7.4.5

11.06.2021

Changes in this release:

• Fixed issue with Nursing Anne Simulator, SimNewB and SimBaby where they would sometimes not connect after running first session.
• Corrected problem where SimPad would sometimes not connect to internet enabled services such as Laerdal Scenario Cloud.
• Fixed ShockLink update issue where some devices would fail to update to newest version.

Changes from version 7.4.0:

• Nursing Anne Simulators will have a new option in Session Information to change the default age and gender of the manikin (per now it only affects prerecorded sounds).
• Age and Gender Setup button is only visible when connected to a Nursing Anne Simulator .
• Voice Conferencing Application (VCA) improvements.
• Occasional aliasing on VCA has been improved.
• Prerecorded sounds will in some cases sound loud through the instructor headset, a button to automatically mute instructor headset when playing prerecorded sounds has been added.
• Fixed issue with Nursing Anne Simulator, SimNewB and SimBaby where they would sometimes not connect after running first session.
• Corrected problem where SimPad would sometimes not connect to internet enabled services such as Laerdal Scenario Cloud.
• Fixed ShockLink update issue where some devices would fail to update to newest version.

Note:

SimPad End of Support (not SimPad PLUS)

• 包括SimPad很快结束技术支持new releases. June 2021 marks 5 year since SimPad PLUS replaced SimPad. SimPad PLUS will continue to develop, but will no longer be compatible with SimPad/Link Box for new releases. SimPad SW release 8.0 will only be for SimPad PLUS. Critical bugs will be released until end of 2021 on version 7.x

Updating to Windows 10?

• Using SimLink or Custom ad hoc network on SimPad, and considering upgrading to Windows 10 on your computers for Laerdal Patient Monitor?
  • Microsoft ended their support for this type of network with the release of Windows 8. From Windows 10 the equipment will need to use a separate simulation network.

Windows 7

• Patient monitor 8.0.0 and newer will not support Windows 7

• Updating Nursing Anne Simulator, SimNewB and SimBaby take up to 20 minutes. Wait for a steady green light on the manikin.
• Resusci manikins are updated with new firmware, the update takes up to 5 minutes.

SimPad 7.3.0

25.01.2021

Changes in this release:

WPA2 Enterprise Wifi network support with username password.

Bugfixes for network stability

Note:

• 包括SimPad很快结束技术支持new releases. June 2021 marks 5 year since SimPad PLUS replaced SimPad. SimPad PLUS will continue to develop, but will no longer be compatible with SimPad/Link Box for new releases. SimPad SW release 8.0 will only be for SimPad PLUS. Critical bugs will be released until end of 2021 on version 7.x

Updating to Windows 10?

• Using SimLink or Custom ad hoc network on SimPad, and considering upgrading to Windows 10 on your computers for Laerdal Patient Monitor?
  • Microsoft ended their support for this type of network with the release of Windows 8. From Windows 10 the equipment will need to use a separate simulation network.

Windows 7

• By the end of 2020 new releases of Patient Monitor will no longer support Windows 7

• Updating Nursing Anne Simulator, SimNewB and SimBaby take up to 20 minutes. Wait for a steady green light on the manikin.
• Resusci manikins are updated with new firmware, the update takes up to 5 minutes.

SimPad 6.8.1

04.12.2019

Changes in this release:

• Bugfix Bad Voice Conferencing Audio.
• BugFix Audio feedback using external microphone to SimJunior manikin .
• Bugfix SimBaby artificial chestmovement while ventilating.
• Bugfix SimStart virtual pads not registered.
• Bugfix SimStart AED not detected on using SimPad BLS Instructor.
• Bugfix Standarized Patient spins forever.

Changes since 6.8.0:

• SimPad :
• SimPad Manual Mode: Shock did not set to the next heart rhythm.
• Licenses: Possible to remove SimPad licenses.
• SimPad Classic: Not able to access SimStore on Wifi.

• Nursing Anne Simulator:
• Voice conferencing system higher default volume
• More silent running chest rise

• SimBaby:
• Possible for the instructor to trigger intubation event in Manual Mode
• Added Gallop heart sound when using SimPad
• Tracheostomy Care: Fixed airway leakage when ventilating while intubated
• Movement and seizures should halt when session is paused
• Release button for stomach distension
• Fixed etCO2 curve on Patient Monitor when ventilating
• no lung sounds when ventilating

• SimNewB:
• Release button for stomach distension
• SimBaby: Possible for the instructor to trigger intubation event in Manual Mode

• Other:
• RA QCPR: Updated Firmware
• Resuci Junior QCPR: Updated Firmware
• SimJunior: Release button for stomach distension
• Sounds Trainer: Possible to adjust sound volume levels

Note:

• Updating Nursing Anne Simulator, SimNewB and SimBaby take up to 20 minutes. Wait for a steady green light on the manikin.
• Resusci manikins are updated with new firmware, the update takes up to 5 minutes.

LLEAP and Laerdal Patient Monitor Downloads

- Multilingual
06.12.2018

SimView Downloads

24.11.2017

Use this link to download latest software to SimView

SimView Mobile Downloads

24.11.2017

Use this link to download latest software to SimView Mobile

Session Viewer Downloads

09.11.2017

Use this link to download latest software to Session Viewer

SimPad 5.9.1 Build 138 (older version)

211.2 MB
02.11.2017

Main changes for SkillReporter:

• 隐藏选定默认注册事件。
• Possibility to exclude hand position from QCPR scoring.
• For manikins that does not support setting for not reducing score on to deep compression a message appears when this is selected
• General bug fixes.

Main changes for Simulation/System

• General bug fixes.

SimPad Theme Editor

- Angielski
05.01.2016

IMPORTANT INFORMATION - This software will only be accessible using Internet Explorer

The Theme Editor is an online PC software tool for creating Themes for the SimPad system when operated using the Manual Mode. The program allows you to easily make new Themes with States and Interventions.

For offline use: Right click anywere in the web page and select Install SimPad Theme Editor onto this computer...

SimPad software version - 1.7.5.17821

202.0 MB - Multilingual
14.01.2014

Having a SimPad software Version below 1.7.5 and want to upgrade to the latest? Then you will ned to update to 1.7.5 before updating to the latest.