下载for LLEAP - Laerdal Learning Application

SIMSTART用户指南

3.4 MB - 英语
10/01/2020

Simulated AED or Monitor Defibrillator training functionality available in Laerdal Learning Application- LLEAP

快速指南WiFi设置

1.2 MB - 英语
24/06/2019

Session Viewer - User Guide

2.7 MB - Multilingual
10/07/2015

莱德尔网络要求文件Rev M

0.7 MB - 英语
23/02/2022

本文档介绍了对劳埃尔模拟设备专门用于预先存在的基础架构的网络的要求。

洛女学习申请（LLEAP）v。8.1.0

1 489.9 MB
07/01/2022

Important:

• You may receive a "Windows Defender SmartScreen prevented an unrecognized app from running" Error Message when installing LLEAP. Explanation and how to handle this is explained here:https://laerdal.force.com/HelpCenter/s/article/How-to-handle-error-message-Windows-Defender-SmartScreen-prevented-an-unrecognized-app-from-running.

8.1.0的LLEAP包含以下内容：

• Bug fixes:
• SimMan 3G PLUS is now available in the selection of virtual simulators.
• CPR指南已更新，以遵守欧洲复苏委员会（ERC 2021）和美国心脏协会（AHA 2020的最新指南）。
• Improvements on how well the Instructor Application GUI scales on computers with display scaling other than 100% (the recommended setting is still scaling at 100%).
• Usingsimpad时修复患者监视器和CO2。
• 使用SIMMOM时修复缺失脉冲控制。
• Added static IP address on SimMan 3G.
• Fix for SimMan 3G PLUS PB changes and missing respons in right arm brachial pulse.
• Fix for unaccesible control buttons on computers with low resolution.

从8.0.0版更改：

• Support for SimMan 3G PLUS.
• New updater for SimMan 3G simulators, providing a more reliable update experience, and improved progress feedback.
• Support for Nursing Anne Geriatric, allowing Nursing Anne Simulators that are using the new geriatric skin to use geriatric vocal sounds.
• Link Box Classic is no longer supported.
• LLEAP on Windows 7 computers is no longer supported.
• SimMan 3G simulators using Windows XP Embedded is no longer supported.
• New version of SimDesigner:
• 依赖于删除Microsoft Silverlight，以便在没有安装Silverlight的情况下可以使用Simdesigner。
• Minor changes to user interface when editing states to make it easier to add many states.
• Missing icons for some heart rhythms added.
• 使用“外部窗口”的选项已被删除。
• Bug fixes:
• Fixes a bug introduced in LLEAP 8.0.0 where video recording was not included in the debrief when using SessionViewer and SimView.
• 修复一个问题的司机wifi适应er used with SimMan 3G was missing when installing LLEAP.

Note:

Updating to Windows 10?

• Using SimLink or Custom ad hoc network on SimPad, and considering upgrading to Windows 10 on your computers for Laerdal Patient Monitor?
  • Microsoft通过释放Windows 8结束了对此类型的网络的支持。从Windows 10开启，设备需要使用单独的仿真网络。莱德尔可以帮助您将所有仿真设备连接到专用网络。了解更多并开始Laerdal.com/Network.

Windows Update

• Before installing LLEAP, to secure a successful installation, please make sure the PC is fully updated through Windows Update. If you have problems starting LLEAP after installation, please download and run Visual C++ 2015 redistributable from this location:Microsoft Visual C++ 2015 Redistributable Update 3.。Select and run vc_redist.x86 then try running LLEAP.

Laerdal Patient Monitor v. 8.1.0

895.6 MB.
07/01/2022

Important:

• You may receive a "Windows Defender SmartScreen prevented an unrecognized app from running" Error Message when installing LLEAP. Explanation and how to handle this is explained here:如何处理错误消息“Windows Defender SmartScreen阻止了无法识别的应用程序运行”？。

洛杉矶患者监控软件与LLEAP和SIMPAD兼容。

在下载LLEAP时，洛杉矶患者监控软件包括在内。此下载允许您在同一台计算机上安装Laerdal患者监视器软件，而无需安装LLEAP。

Changes in this release:

• 新版本与LLEAP 8.1.0对齐

Note:

Updating to Windows 10?

• Using SimLink or Custom ad hoc network on SimPad, and considering upgrading to Windows 10 on your computers for Laerdal Patient Monitor?
  • Microsoft通过释放Windows 8结束了对这种类型的网络的支持8.从Windows 10，设备需要使用单独的仿真网络。

Windows 7的

• Laerdal Patient Monitor 7.3 is the last version that supports Windows 7

LLEAP补丁7.3.0

0.4 MB - English
28/07/2021

LLEAP补丁为7.3.0，对于旧的SIMMAN 3G无法使用LLEAP 8.0

This update is supplied to fix an issue where chest rise and lung sounds ceases on the SimMan 3G when used with ASL 5000 using a ventilator setting of PEEP 2 cm H2O or greater. The issue can also be resolved by upgrading to LLEAP 8.0.0. This patch should only be used if upgrade to 8.0.0 is not possible, e.g if using older SimMan 3G with XP embedded which is not supported on LLEAP 8.0.0 and onwards.

Important: ASL 5000 plugin needs to be uninstalled before patch installation and reinstalled afterwards. Remember to back up custom lung models when prompted during uninstall process and import again during install process after upgrade to patch.

Note:

SimMan 3G updater might need several tries before the patch is installed on simulator

莱德尔学习申请（LLEAP）v。7.3.0

1 526.9 MB
16/03/2021

Important:

• You may receive a "Windows Defender SmartScreen prevented an unrecognized app from running" Error Message when installing LLEAP. Explanation and how to handle this is explained here:https://laerdal.force.com/HelpCenter/s/article/How-to-handle-error-message-Windows-Defender-SmartScreen-prevented-an-unrecognized-app-from-running.

Changes in this release:

• New Device Connection Manager (DCM) application to manage network configurations more efficiently on multiple manikins.
• 使用WiFi USB适配器从SFNW和Simman3G增强对企业网络安全的支持。
• 修复了Simman3G系统时间未同步的问题。
• 高延迟的网络上改进了模拟器连接。
• 将WiFi驱动程序介入LLEAP安装程序（SIMMAN3G上的SOM）。
• Fixed an issue where the simulation wouldn't use the wanted simulation profile unless explicitly selected. Could lead to using wrong units and similar problems.
• LLEAP支持传输层安全性（TLS）1.2或更大用于登录环境云。
• 修复了导致帮助文件不工作的问题。

Note:

Updating to Windows 10?

• Using SimLink or Custom ad hoc network on SimPad, and considering upgrading to Windows 10 on your computers for Laerdal Patient Monitor?
  • Microsoft通过释放Windows 8结束了对此类型的网络的支持。从Windows 10开启，设备需要使用单独的仿真网络。莱德尔可以帮助您将所有仿真设备连接到专用网络。了解更多并开始Laerdal.com/Network.

Last LLEAP version supporting Windows 7

• LLEAP 7.3 will be the last version that supports Windows 7.

Last version supporting old SimMan 3G family simulators

Due to end of life for Windows XP Embedded used on older SimMan3G simulators, LLEAP will no longer supported as of this version, this applies to the following simulators - unless they have been upgraded to use Windows 7:

• SimMan3G simulators with serial numbers lower than 212-16140000
• SimMan3G Essential simulators with serial numbers lower than 213-16140000
• Simman3G基本出血模拟器，序列号低于214-1610000

Windows Update

• Before installing LLEAP, to secure a successful installation, please make sure the PC is fully updated through Windows Update. If you have problems starting LLEAP after installation, please download and run Visual C++ 2015 redistributable from this location:Microsoft Visual C++ 2015 Redistributable Update 3.。Select and run vc_redist.x86 then try running LLEAP.

Laerdal PatientMonitor v. 7.3.0

932.6 MB.
11/03/2021

Important:

• You may receive a "Windows Defender SmartScreen prevented an unrecognized app from running" Error Message when installing LLEAP. Explanation and how to handle this is explained here:如何处理错误消息“Windows Defender SmartScreen阻止了无法识别的应用程序运行”？。

洛杉矶患者监控软件与LLEAP和SIMPAD兼容。

在下载LLEAP时，洛杉矶患者监控软件包括在内。此下载允许您在同一台计算机上安装Laerdal患者监视器软件，而无需安装LLEAP。

Changes in this release:

• 新版本与LLEAP 7.3.0对齐
• General maintenance, bugfixes and improvements.

Note:

Updating to Windows 10?

• Using SimLink or Custom ad hoc network on SimPad, and considering upgrading to Windows 10 on your computers for Laerdal Patient Monitor?
  • Microsoft通过释放Windows 8结束了对这种类型的网络的支持8.从Windows 10，设备需要使用单独的仿真网络。

Windows 7的

• Laerdal患者监视器7.3将是支持Windows 7的最后一个版本

LLEAP 7.2.0场景云安全更新

0.7 MB.
25/01/2021

This update is needed for LLEAP when using Laerdal Scenario Cloud as of now.

Using 7.2 this patch is needed to:

• 同步方案
• Sign in as a Scenario Cloud user
• 在离线期间30天后验证LSC订阅

Laerdal Learning Application (LLEAP) v. 7.2.0

1 657.3 MB
04/11/2020

Changes in this release:

• Changed authentication provider to align with changes in Scenario Cloud.
• 为PC或平板电脑用户添加了Windows 7的警报，因为2021年的新版本将不再支持它。
• Improved discovery of manikins and patient monitors.
• 改进了Simman 3G的更新和配置处理。
• Fixed an issue where the name of SimMan 3G could not be changed.
• 修复了SPO2 Vital参数未按预期消失的问题。
• Fixed an issue where the "Ok" button would not allow you to proceed in the theme selection dialog.
• 改进了Simman 3G的日志文件的处理。
• 移除了冲击波闪光灯。
• General maintenance, bugfixes, and improvements.

Important:

• Once upgrading to 7.2.0 with Scenario Cloud the organization account is transferred to a new login authentication system and so cannot revert back to 7.1.0 or earlier.
• Before installing LLEAP, to secure a successful installation, please make sure the PC is fully updated through Windows Update. If you have problems starting LLEAP after installation, please download and run Visual C++ 2015 redistributable from this location:Microsoft Visual C++ 2015 Redistributable Update 3。Select and run vc_redist.x86 then try running LLEAP.

Note:

Updating to Windows 10?

• Using SimLink or Custom ad hoc network on SimPad, and considering upgrading to Windows 10 on your computers for Laerdal Patient Monitor?
  • Microsoft通过释放Windows 8结束了对此类型的网络的支持。从Windows 10开启，设备需要使用单独的仿真网络。莱德尔可以帮助您将所有仿真设备连接到专用网络。了解更多并开始Laerdal.com/Network.

Windows 7的

• 到2020年底，LLEAP的新版本将不再支持Windows 7

Laerdal Patient Monitor v. 7.2.0

911.7 MB.
04/11/2020

洛杉矶患者监控软件与LLEAP和SIMPAD兼容。

在下载LLEAP时，洛杉矶患者监控软件包括在内。此下载允许您在同一台计算机上安装Laerdal患者监视器软件，而无需安装LLEAP。

New version to align with LLEAP 7.2.0

Changes in this release:

• 修复了SPO2 Vital参数未按预期消失的问题。

Note:

Updating to Windows 10?

• Using SimLink or Custom ad hoc network on SimPad, and considering upgrading to Windows 10 on your computers for Laerdal Patient Monitor?
  • Microsoft通过释放Windows 8结束了对这种类型的网络的支持8.从Windows 10，设备需要使用单独的仿真网络。

Windows 7的

• 到2020年底，LLEAP的新版本将不再支持Windows 7

莱德尔学习申请（LLEAP）v。6.8.1

1 225.5 MB
2019/11/12

Changes in this release:

• Simulator lost connection - Improving error message.
• Simbaby - 改进的气静脉功能，关闭喉痉挛和露天通道。
• Simbaby - 临床阻塞未显示虚拟模拟器的临床障碍的问题。
• 主题 - 现在显示与可用模拟器相关的功能。
• SimJunior - Fixed issue where simualtor did not show in simulator list.
• SIMMOM - 现在可以使用高级选项连接SIMMOM。
• LLEAP - Fixed issue related to changeing vital signs before starting session.
• LLEAP - Fixed issue related to application start.
• Simman 3G - 修复了对不支持它的SIMMAN 3G记录了对气管瘤开放的变化的问题。
• LLEAP - Fixed an issue where SessionViewer still shows state "Recording" if LLEAP selects to start a new session .
• Stop compression event - Fixed an issue where stopping simulated compression did not result in a "Stop compression" even.

自6.8.0以来的变化：

• 添加了对气管造口术的Simbaby的支持。
• Several improvements and adjustments to UI for SimNewB.
• Added a Stopwatch function. Click on the time-field next to the Play/Pause button on the Session control window to show the Stopwatch window..
• 添加了一个新的预先录制好的声音”啊K” for Adult(Male/Female) and Child.
• 用于胃距离的UI改进。现在有一个单独的“释放空气”按钮。对于SimJunior，还有一个单独的“膨胀”按钮。
• Fixed an issue where LLEAP would sometimes crash when ending a session.
• Fixed an issue where Tongue fallback was not working properly when running a scenario.
• Fixed an issue where transitions of User Defined Variables would not always end up on the correct value.

洛杉矶患者监测率v。6.8.1

673.3 MB
2019/11/12

洛杉矶患者监控软件与LLEAP和SIMPAD兼容。

在下载LLEAP时，洛杉矶患者监控软件包括在内。此下载允许您在同一台计算机上安装Laerdal患者监视器软件，而无需安装LLEAP。

与lleap 6.8.1对齐的新版本

Changes in this release:

• Defibrillator Monitor - Fixed issue with layout.
• Patient Monitor Layout - Fixed issue with hidden buttons after minimizing application.
• METRONONOME - 定位声音没有开始的问题。
• ECG AV块 - 质疑高于HR的错误问题。
• SimMom - Fixed issue where SimMom was listed twice in simulator list.

自6.8.0以来的变化：

• Simulated AED and Defibrillator monitor (SimStart) now have translated voice prompts.
• 改进模拟AED /除颤器监测器上的音量指示器。
• Fixed an issue where the NIBP auto measurement would be triggered too often.
• 修复了在激活测量之前有时会显示NIBP测量的问题。
• Fixed an issue where some buttons would not show after minimizing the Patient Monitor window.
• 修复了AED模式中患者监视器有时会崩溃的问题。

SimView下载

24/11/2017

使用此链接下载最新软件到SimView

SimView移动下载

24/11/2017

使用此链接将最新软件下载到SimView Mobile

会话查看器下载

09/11/2017

Use this link to download latest software to Session Viewer