With this patch it is possible to communicate between the ELO monitor and laptops via a USB 3.0 port. The patch also supports newer versions of the ELO monitor and is compatible with Windows 7 software. The patch addresses the following patient simulator versions (only): SimMom 1.0.0 SimBaby 1.6 SimMan 3.5 SimNewB 1.4 SimNewB for VS2 2.0.1.77 ALS Sim Adv 1.1 ALS Sim Adv for VS2 2.0.0.122 SimJunior 1.0.2 SimJunior for VS2 2.0.0.56 SimMan3G 2.3.4 Notice that you have to re-apply the patch if you install additional patient simulators on your computer. Future versions of the simulators will contain the new ELO driver and do not need the patch. However, if you combine a future version with any of the versions listed above, the patch is mandatory. PLEASE NOTE: You must also use the latest version of the Laerdal Debrief Viewer

SimNewB Advanced Software 2.0.1.77 for SimPad Link Box

316.8 MB - Multilingual
04.04.2013

For PC operation with the SimPad Link Box only (This software will not work with VitalSim control unit)
SimPad Link Box must be operating SimPad Software version 1.0.7 up to v 1.7.5 NOTE: Do not use SimPad SW 5.0.x or higher as this SW is not suitable for the Legacy Instructor Application.Download the latest software from the software section on the SimPad page.
The SimNewB Advanced version software will only work with ELO touchsceen monitors. Not for use with SimPad Portable Patient Monitor or SimPad 17" Patient Monitors.

SimNewB

258.2 MB - English
30.11.2011

SimNewB Instructor Application Software was discontinued September 2014 and replaced by Laerdal Learning Application (LLEAP) Software. Laerdal will ensure availability and support of Instructor Application (latest software version 1.4.2) for a minimum of five years from the date of discontinuation. No additional improvements or modifications will be made to the Instructor Application. In order to access the latest software advancements available for your simulator, please learn more about LLEAP.

Laerdal Debrief Viewer

82.3 MB - English
05.09.2011

For use with Legacy Instructor Application Software

SimNewB STANDARD Software Version 1.3

38.0 MB - English
13.05.2010

SimNewB Standard Version 1.3. The SimNewB Standard Software have been updated to version 1.3. If you use both the Advanced and Standard SoftWare on your computer you need to upgrade both.

Førstehjelpstrening HLR Avansert livredning Utstyr for veiledning i sanntid Treningsløsninger for AED	Medisinsk utdanning Pasientsimulatorer Treningsdukker Ferdighetstrenere Vene/Arterie Trening	Luftveishåndtering Beskyttelse munn-til-munn Ventilering Medisinske sug Eget varemerke	Deler & Tilbehør til Hjertestarter Deler & Tilbehør til HeartStart hjertestartere Monitor/Hjertestarter Treningsløsninger for AED
Immobilisering Nakkekrager Ryggbrett Hodestabilisatorer	Pakkeløsninger Våre pakkeløsninger er laget for at du skal spare tid ved å handle via vår nettbutikk.

Førstehjelpstrening

Medisinsk utdanning

Luftveishåndtering

Deler & Tilbehør til Hjertestarter

Immobilisering

Pakkeløsninger

Nedlastinger for SimNewB

DFU

Dokumenter

Programvare